home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Merciful 1
/
Merciful - Disc 1.iso
/
software
/
w
/
word_perfect
/
wordperfectv5.0c.dms
/
wordperfectv5.0c.adf
/
Readme.Print
< prev
next >
Wrap
Text File
|
1989-10-31
|
4KB
|
111 lines
PREFERENCES PRINTERS
In an effort to create more printer drivers, we have removed the
Preference printers from the Print disk. The only preferences
driver that remains is the "Generic" driver which is found on the
WP disk in Devs/Printers directory. If another Preferences
driver is needed, you must copy that driver from the Devs/
Printers directory on the WorkBench disk to the Devs/Printers
directory on the WP disk.
*PRINTER DRIVERS
Printers whose name begins with an asterisk(*) are limited
support printer drivers. We have borrowed some printers from
computer stores to enable us to write the drivers for them and
then returned them, so these printers are not "in house" for us
to test possible problems you may have.
POSTSCRIPT PRINTERS
8 new PostScript Printer drivers have been added recently to our
Print disks. The styles and point sizes for each driver is
listed below:
For PostScript printers AvantGarde, Bookman, Courier, and
Helvetica:
Font 1: 11pt Standard Font 5: 9pt Standard
Font 2: 11pt Italic Font 6: 9pt Italic
Font 3: 11pt Bold Font 7: 11pt Symbol
Font 4: 11pt Bold Italic Font 8: 17pt Bold
For PostScript printers NewCenturySchoolBook, Palatino, and Times
Roman:
Font 1: 12pt Standard Font 5: 9pt Standard
Font 2: 12pt Italic Font 6: 9pt Italic
Font 3: 12pt Bold Font 7: 12pt Symbol
Font 4: 12pt Bold Italic Font 8: 17pt Bold
For PostScript printer ZapfChancery:
Font 1: 11pt MedItalic Font 5: 11pt Symbol
Font 2: 9pt MedItalic Font 6: 12pt MedItalic
Font 3: 5pt MedItalic Font 7: 12pt Symbol
Font 4: 8pt MedItalic Font 8: 17pt MedItalic
They have been tested and have produced very satisfactory
results. For best results when using a PostScript printer
driver, a few basic procedures must be followed:
a) Set the destination inside the Print Program to "Device or
File."
b) Type "Ser:" in the requester box and select "Accept."
c) In the "Change Serial" section of Preferences, select
9600 Baud, 8 Read Bit, 8 Write Bit, 1 Stop Bit, Parity-None,
and Handshaking xOn/xOff.
Be sure that you save the selections made.
d) The PScript.ps file must be in the Print: directory. The file
is included on the Print disk.
Many PostScript printers require use of a Null-Modem cable or
adapter when connected through the Serial interface.
LASERWRITER DRIVERS
There are four Printer drivers for the Laserwriter. Problems
with the LaserWriter's Serial interface, acknowledged by Apple
Computers, and documented by Adobe are sometimes the cause of
unsatisfactory results. The problems exist in some
LaserWriter's, while others may have no problems.
The LaserWriter drivers are PostScript drivers and may be used
for any PostScript printer and the other PostScript drivers can
be used for the LaserWriter.
AUGUST 10 PRINT RELEASE
In the August 10 release, problems were introduced into several
of the *limited supported printer drivers. In this release,
those problems have been corrected.
LASERJET DRIVERS
There have been two LaserJet definitions introduced on this Print
disk. They are the LaserJt Reg,+,500+ Z: Helvetica and Z: Times
Roman drivers.
OTHER NEW DRIVERS
Drivers have been added for the following printers:
1. *Star NX-10\NL-10 (IBM)
2. *Citizen 120D
3. PostScript Avantgarde
4. PostScript Bookman
5. PostScript Courier
6. PostScript Helvetica
7. PostScript NewCenturySchoolBook
8. PostScript Palatino
9. PostScript Times Roman
10. PostScript ZapfChancery
11. NEC P5200/5300
12. *NEC P2200
The 4 LaserWriter drivers and the Panasonic KX-P1092i driver are
now listed as fully supported.